<< BACK NEXT>>
         
 
   
   
   
   


   
 
Comparison between World Ionic Air Cleaner and Normal Ionic Air Cleaner
  World Ionic Air Cleaner Normal Ionic Air Cleaner
Neg. Ions Density 106 ~107 个/cm3

≤106 个/cm3

Ozone Density <0.03mg/m3 QTTY over
Stability no friction loss and never eroded easy to be oxidized
Security short circuit <0.1ma, touchable >= 7000 volts generated, untouchable
Facility no need for cleaning and replacement replaced frequently after oxidized

illustration to World pins emitting Neg. Ions

illustration to normal metal needles emitting Neg. Ions
World Ionic Air Cleaner

Quite different from normal Negative Ion generation theory, thunder-lightening theory, WORLD air cleaning products adopt the cutting-edge new material as its base to emit neg. ions. On the surface of this material are numerous fur-like needles, which are used to be passed by an electrical charge and squeezed down the tip of it to create neg. ion. Attentions must be on these needles because they’re although conductive but their nature is of non-metal that determines the needles of this kind needn’t be replaced, but metal needles, which is usually adopted to be the base to emit neg. ion in normal air cleaners are two few (generally 1-4 needles) to create enough neg. ions. On the other side, metal needles are easily to be oxidized and become rusty that usually cause frequent replacement of the metal parts. However by introducing the new material, all WIDC’s air cleaning products are free from these two detects and bring to our customers the true cleaning air body, just beside them.










For a quick look at the differents btw WORLD ionic air cleaners and normal ionic air cleaners please refer to the form below: